News

News > How to match the sliding gate controller and its wiring

How to match the sliding gate controller and its wiring

Edor | 2021/04/26

In daily life, the application of electric sliding gate opener is becoming more and more extensive, and it will be used in all kinds of decoration facilities such as shops and shopping malls, hotels, banks, hospitals, schools, agencies, factories and mines, stations, docks, warehouses, transformer rooms and industrial plants. Therefore, for sliding gate manufacturers, the sliding gate controller and its control system are particularly important. Let me explain to you how to match the sliding gate controller and its wiring.

The price-performance ratio of current electronic products is very high. A mobile phone worth a few hundred yuan has exceeded the performance of a computer ten years ago, but it often breaks after less than a year or two. This involves electronic components. Reliability issues. Chips that are truly used in industry are often not so powerful in performance, but have extremely high requirements for reliability. So when buying a sliding gate controller, you can’t just look at the function or performance. Like some brand products, although they don’t support many functions, they can operate continuously for 7×24 hours without any problems.

Choose whether to use an external sliding gate controller or a built-in sliding gate controller according to your needs. Generally, you can choose an external sliding gate controller at the entrance of factories, schools, and communities, which is more convenient for guard management. Where there is a large flow of people, the sliding gate motor opens and closes frequently. It is best to use a DC sliding gate motor, because the AC sliding gate motor generates a lot of heat during frequent opening and closing, which will affect the performance of the motor. After selecting the motor, it is best to choose to install an infrared protection device. The controller of the sliding gate motor has an infrared protection interface for users to choose.

Wiring mode of sliding gate controller:

There are two main wiring methods for the sliding gate controller. One is external wiring, the other is built-in wiring, and the external type is to install the sliding gate controller in the guard room. A seven-core electric gate special cold-proof flat wire is connected. The COM terminal on the motor represents the connection between the motor common line and the motor common port of the controller. The method of connecting the travel switch line is to connect the two magnetic switches on the motor base. Connect each of the lines in parallel with the travel common port of the controller, and then connect the remaining two lines to the open limit and the closed limit respectively. The two wires on the warning light on the chassis are connected to the common terminal of the motor and the door opening signal respectively, and then the 220V power supply is connected to the 220V port of the controller, even if the wiring of the basic functions is completed.

LIVE CHAT

ONLINE SERVICE

[email protected]

+86 139 6028 6508